How To Flash Software Update Panasonic Eluga

This handset was initially released with Android 2.3 Gingerbread and dual core processor. The specs are more than enough to process recent apps though the Android version is far from updated. However, those might not want to use the old Android forever, they can try installing the recent Software Update Panasonic Eluga. If you have an Eluga phone, make sure you perform these requirements before you start the update process.

Software Update Panasonic Eluga Requirements

If you want to install this update, you should have the latest Gingerbread version installed on your phone. There should be more than 30MB of space in your phone’s internal memory so wipe some data or move them into the external storage. In addition, there should be 150MB of space on your external storage. The Software Update Panasonic Eluga process may take hours to complete depending on your phone specs and internet connection so it is best for you to fully charge your device. Download and install the MediaTek USB VCOM drivers and the latest SP Flash Tool on your computer. Download the Update ROM File.

Software Update Panasonic Eluga Installation

First, power off your device completely by removing and placing back the battery. Connect your phone to your computer via the USB cable. Now unpack and run the SP Flash Tool and press Scatter-loading button to load the scatter file you have downloaded previously. Browse and choose the Scatter txt File on your folder. The file will be loaded to the Flash tool for a few minute. Tap Option and then tap USB Model and tap USB Model. Tap Option and then DA Download All, Speed and then High Speed. Tap High Speed. Power off your device, take out the battery and put it back after a few seconds but keep turning the phone off.


Press Download button or F9 to download update or click the Firmware Upgrade to start updating the software. Connect your device into your computer using USB data cable. You will see the process loading, there will be Purple, Red, and Yellow progress bar running on the screen. When the whole process is complete, there will be a green circle surrounding the OK Notification on the screen. You may disconnect the USB data cable from your phone and reboot your device. It is normal that the boot process takes longer time to finish as the Software Update Panasonic Eluga makes changes to the phone. Now you can enjoy the new Android features.


Leave a Reply

Your email address will not be published. Required fields are marked *